About two weeks ago, I announced that I was back leading this year’s State of HTML 2025 survey, after a one year hiatus. We are grateful for all the suggestions that poured in, they were immensely helpful in shaping the survey. After two weeks of hard work from a small team spanning three continents, we are finally ready to launch!

I would urge each and every one of you that works with the web platform to fill out this survey. It’s a unique opportunity to have your voice heard in the browser vendors’ decision-making process. Survey results are used by browsers to prioritize roadmaps — the reason Google is funding this. The results from State of … surveys directly feed into prioritization for next year’s Interop project.

Time spent thoughtfully filling them out is an investment that can come back to you tenfold in the form of seeing features you care about implemented, browser incompatibilities being prioritized, and gaps in the platform being addressed. In addition to browsers, several standards groups are also using the results for prioritization and decision-making.

Additionally, you get to learn about new and upcoming features you may have missed, and get a personalized, sharable score at the end to see how you compare to other respondents!

Take State of HTML 2025 Survey

Acknowledgements

I would like to thank the following people for their help in fleshing out the survey:

• Sacha Greif for actually implementing the survey and tirelessly discussing my ideas
• My apprentice Dmitry Sharabin for various fixes and improvements
• My Google contacts, Philip Jägenstedt and Kadir Topal for making my involvement possible
• And everyone who responded to my earlier call for suggestions — these were invaluable in shaping the survey, and I wish I could include them all!

FAQ

What’s new this year?

We spent a lot of time thinking about which features we are asking about and why. As a result, we added 35 new features, and removed 18 existing ones to make room. This is probably one of the hardest parts of the process, as we had to make some tough decisions.

We are also using the Web Components section to pilot a new format for pain points questions, consisting of a multiple choice question with common pain points, followed by the usual free form text list:

While this increases the number of questions, we are hoping it will reduce survey fatigue by allowing participants to skip the freeform question more frequently (or spend less time on it) if most of their pain points have already been covered by the multiple choice question.

Last but not least, we introduced browser support icons for each feature, per popular request:

Is the survey only available in English?

Absolutely not! Localization has been an integral part of these surveys since the beginning. Fun fact: None of the people working on these surveys is a native English speaker.

However, since translations are a community effort, they are not necessarily complete, especially in the beginning. If you are a native speaker of a language that is not yet complete, please consider helping out!

Two years ago, I was funded by Google to design the inaugural State of HTML survey. While I had led State of … surveys before (also graciously sponsored by Google), that was by far the most intense, as 0→1 projects often are. In addition to the research, content, and analysis work that goes into every State of … survey, the unique challenges it presented were a forcing function for finally tackling some longstanding UX issues with these surveys. As a result, we pioneered new survey interaction UIs, and validated them via usability testing. This work did not just affect State of HTML, but had ripple effects on all subsequent State of … surveys.

The results made it all worth it. Turnout was the highest ever for a new Devographics ^[1] survey: 21 thousand participants, which remains a record high for State of HTML. The survey findings heavily influenced Interop 2024 (hello Popover API and Declarative Shadow DOM!) and helped prioritize several other initiatives, such as stylable selects. Despite lower 2024 participation, the survey still significantly influenced Interop 2025; notably, View transitions was added after being prominent in the survey for two years in a row.

This is the goal of these surveys: to drive meaningful change in the web platform. Sure, getting a shareable score about what you know and seeing how you compare to the rest of the industry is fun, but the reason browser vendors pour thousands of dollars into funding these surveys is because they provide unique vendor-neutral insights into developer pain points and priorities, which helps them make better decisions about what to work on. And this ultimately helps you: by getting your voice heard, you can directly influence the tools you work with. It’s a win-win: developers get better tools, and browser vendors get better roadmaps.

State of HTML 2025

Last year, I was too busy to take the lead again. Wrapping up my PhD and starting a new job immediately after, there was no time to breathe, let alone lead a survey. I’m happy to be returning to it this year, but my joy is bittersweet.

When I was first asked to lead this year’s survey a few months ago, I was still too busy to take it on. Someone else from the community accepted the role — someone incredibly knowledgeable and talented who would have done a fantastic job. But they live in the Middle East, and as the war escalated, their safety and their family’s well-being were directly impacted. Understandably, leading a developer survey became the least of their concerns. In the meantime, I made a few decisions that opened up some availability, and I was able to step in at the last minute. It’s a sobering reminder that events which feel far away can hit close to home — shaping not just headlines, but the work and lives of people we know.

Web Platform Features at the verge of Interop

A big part of these surveys is “feature questions”: respondents are presented with a series of web platform features, and asked about their familiarity and sentiment towards them. At the end, they get a score based on how many they were familiar with that they can share with others, and browser vendors and standards groups get signal on which upcoming features to prioritize or improve.

You can see which features were included in last year’s survey here or in ^[2] the table below.

I believe that co-designing these surveys with the community is the best way to avoid blind spots. While the timeline is tighter than usual this year (the survey is launching later this month!), there is still a little time to ask:

What does “on your radar” mean? Features you’re excited about and would love to see progress on.

Why focus on upcoming features? The best candidates for these surveys are features that are mature enough to be fleshed out (at least a mature proposal, ideally a spec and WPT tests), but not so mature they have already been implemented in every browser. These are the features for which a survey such as this can drive meaningful impact.

If it’s so early for a feature that it’s not yet fleshed out, it’s hard to make progress via initiatives such as Interop. Interest is still useful signal to help prioritize work on fleshing it out, but it’s a bit of a longer game. And for features that are already implemented everywhere, the only thing that can improve things further is passage of time — a problem for which I unfortunately have no solution (yet).

Obviously we’re looking at all the usual suspects already, and initiatives such as webstatus.dev and Web platform features explorer provide a treasure trove of data which makes this task infinitely easier than it used to be. But this kind of preliminary signal is also useful for filtering and prioritization — to give you a sense, my list of candidate new features to ask about already has 57 items (!). Given that State of HTML 2024 asked about 49 features, that will need some very heavy pruning.

Any way to reach me works fine. You can post in the comments here (preferred), or reply on BlueSky, Mastodon, Threads, LinkedIn, or Twitter. Make sure to check the other replies first, and 👍 those with features you care about. Looking forward to your ideas and comments!

You may be familiar with this wonderful illustration and accompanying blog post by Henrik Kniberg about good MVPs:

It’s a very visual way to illustrate the age-old concept that that a good MVP is not the one developed in isolation over months or years, grounded on assumptions about user needs and goals, but one that delivers value to users as early as possible, so that future iterations can take advantage of the lessons learned from real users.

From Hovercar to Skateboard

I love Henrik’s metaphor so much, I have been using a similar system to flesh out product requirements and shipping goals, especially early on. It can be immediately understood by anyone who has seen Henrik’s illustration, and I find it can be a lot more pragmatic and flexible than the usual simple two tiered system (core requirements and stretch goals). Additionally, I find this fits nicely into a fixed time, variable scope development process, such as Shape Up.

🛹 The Skateboard aka the Pessimist’s MVP

What is the absolute minimum we can ship, if need be? Utilitarian, bare-bones, and somewhat embarrassing, but shippable — barely. Anything that can be flintstoned gets flintstoned.

🛴 The Scooter aka the Realist’s MVP

The minimum product that delivers value. Usable, but no frills. This is the target.

🚲 The Bicycle aka the Optimist’s MVP

Stretch goals — UX polish, “sprinkles of delight”, nonessential but high I/E features. Great if we get here, fine if we don’t.

🏍️ The Motorcycle

Post-launch highest priority items.

🚗 The Car

Our ultimate vision, taking current constraints into account.

🏎️ The Hovercar aka the North Star UI

The ideal experience — unconstrained by time, resources, or backwards compatibility. Unlikely to ship, but a guiding light for all of the above.

The first three stages are much more concrete and pragmatic, as they directly affect what is being worked on. The more we go down the list, the less fleshed out specs are, as they need to allow room for customer input. This also allows us to outline future vision, without having to invest in it prematurely.

The most controversial of these is the last one: the hovercar, i.e. the North Star UI. It is the very antithesis of the MVP. The MVP describes what we can ship ASAP, whereas the North Star describes the most idealized goal, one we may never be able to ship.

It is easy to dismiss that as a waste of time, a purely academic exercise. “We’re all about shipping. Why would we spend time on something that may not even be feasible?” I hear you cry in Agile.

Stay with me for a moment, and please try to keep an open mind. Paradoxical as it may sound, fleshing out your North Star can actually save you time. How? Start counting.

Core Idea

At its core, this framework is about breaking down tough product design problems into three more manageable components:

1. North Star: What is the ideal solution?
2. Constraints: What prevents us from getting there right now?
3. Compromises: How close can we reasonably get given these constraints?

One way to frame it is is that 2 & 3 are the product version of tech debt.^[1]

It’s important to understand what constraints are fair game to ignore for 1 and which are not. I often call these ephemeral or situational constraints. They are constraints that are not fundamental to the product problem at hand, but relate to the environment in which the product is being built and could be lifted or change over time. Things like:

• Engineering resources
• Time
• Technical limitations (within reason)
• Performance
• Backwards compatibility
• Regulatory requirements

Unlike ephemeral constraints, certain requirements are part of the problem description and cannot be ignored. Some examples from the case studies below:

• Context Chips Survey UI: Efficiency and discoverability
• CSS Nesting Syntax: Conciseness and readability

While these may be addressed differently in different solutions, it would be an oxymoron to have a North Star that did not take them into account.

Benefits

1. It makes hard product problems tractable

Nearly every domain of human endeavor has a version of divide and conquer: instead of solving a complex problem all at once, break it down into smaller, manageable components and solve them separately. Product design is no different.

This process really shines when you’re dealing with the kinds of tough product problems where at least two of these questions are hard, so breaking it down can do wonders for reducing complexity.

2. It makes the product design process robust and adaptable

By solving these components separately, our product design process becomes can more easily adapt to changes.

I have often seen “unimplementable” solutions become implementable down the line, due to changes in internal or external factors, or simply because someone had a lightbulb moment.

By addressing these components separately, when constraints get lifted all we need to reevaluate is our compromises. But without this modularization, our only solution is to go back to the drawing board. Unsurprisingly, companies often choose to simply miss out on the opportunity, because it’s cheaper (or seems cheaper) to do so.

3. It facilitates team alignment by making the implicit, explicit

Whether you realize it or not, every shipping goal is always derived from the North Star, like peeling layers off an onion. In some contexts the process of breaking down a bigger shipping goal into milestones that can ship independently is even called layering.

The process is so ingrained, so automatic, that most product designers don’t realize they are doing it. They go from hovercar to car so quickly they barely realize the hovercar was there to begin with. Thinking about the North Star is taboo — who has time for daydreaming? We must ship, yesterday!

But the hovercar is fundamental. Without it, there is no skateboard — you can’t reduce the unknown. When designing it is not an explicit part of the process, the result is that the main driver of all product design decisions is something that can never be explicitly discussed and debated like any other design decision. In what universe is that efficient?

A skateboard might be a good MVP if your ultimate vision is a hovercar, but it would be a terrible minimum viable cruise ship — you might want to try a wooden raft for that.

Making the North Star taboo doesn’t make it disappear (when did that ever work?).

It just means that everyone is following a different version of it. And since MVPs are products of the North Star, this will manifest as difficulty reaching consensus at every step of the way.

The product team will disagree on whether to ship a skateboard or a wooden raft, then on whether to build a scooter or a simple sailboat, then on whether to work on a speedboat or a yacht, and so on. It will seem like there is so much disconnect that every decision is hard, but there is actually only one root disconnect that manifests as multiple because it is never addressed head on.

Here is a story that will sound familiar to many readers:

A product team is trying to design a feature to address a specific user pain point. Alice has designed an elegant solution that addresses not just the problem at hand, but several prevalent longstanding user pain points at once — an eigensolution. She is aware it would be a little trickier to implement than other potential solutions, but the increase in implementation effort is very modest, and easily offset by the tremendous improvement in user experience. She has even outlined a staged deployment strategy that allows it to ship incrementally, adding value and getting customer feedback earlier.

Excited, she presents her idea to the product team, only to hear engineering manager Bob dismiss it with “this is scope creep and way too much work, it’s not worth doing”. However, what Bob is actually thinking is “this is a bad idea; any amount of work towards it is a waste”. The design session is now derailed; instead of debating Alice’s idea on its merits, the discussion has shifted towards costing and/or reducing effort. But this is a dead end because the amount of work was never the real problem. In the end, Alice wants to be seen as a team player, so she backs off and concedes to Bob’s “simpler” idea, despite her worries that it is overfit to the very specific use case being discussed, and the product is now worse.

Arguing over effort feels safer and less confrontational than debating vision — but is often a proxy war. Additionally, it is not productive. If the idea is poor, effort is irrelevant. And once we know an idea is good and believe it to our core, we have more incentive to figure out implementation, which often proves to be easier than expected once properly investigated. Explicitly fleshing out the Hovercar strips away the noise and brings clarity.

When we answer the questions above in order and reach consensus on the North Star before moving on to the compromises, we know what is an actual design decision and what is a compromise driven by practical constraints. Articulating these separately, allows us to discuss them separately. It is very hard to evaluate tradeoffs collaboratively if you are not on the same page about what we are trading off and how much it’s worth. You need both the cost and the benefit to do a cost-benefit analysis!

Additionally, fleshing the North Star out separately ensures that everyone is on the same page about what is being discussed. All too often have I seen early design sessions where one person is discussing the skateboard, another the bicycle, and a third one the hovercar, no-one realizing that the reason they can’t reach consensus is that they are designing different things.

4. It can improve the MVP via user testing

Conventional wisdom is that we strip down the North Star to an MVP, ship that, then iterate based on user input. With that process, our actual vision never really gets evaluated and by the time we get to it, it has already changed tremendously.

But did you know you can actually get input from real users without writing a single line of code?

Believe it or not, you don’t need to wait until a UI is prototyped to user test it. You can even user test a low-fi paper prototype or even a wireframe. This is widely known in usability circles, yet somehow entirely unheard of outside the field. The user tells you where they would click or tap on every step, and you mock the UI’s response by physically manipulating the prototype or showing them a wireframe of the next stage.

Obviously, this works better for some types of products than others. It is notably hard to mock rich interactions or UIs with too many possible responses. But when it does work, its Impact/Effort ratio is very high; you get to see whether your core vision is on the right track, and adjust your MVP accordingly.

It can be especially useful when there are different perspectives within a team about what the North Star might be, or when the problem is so novel that every potential solution is low-confidence. No-one’s product intuition is always right, and there is no point in evaluating compromises if it turns out that even the “perfect” solution was not actually all that great.

5. It paves the way for future evolution

So far, we have discussed the merits of designing our North Star, assuming we will never be able to ship it. However, in many cases, simply articulating what the North Star is can bring it within reach. It’s not magic, just human psychology.

Once we have a North Star, we can use it to evaluate proposed solutions: How do they relate to it? Are they a milestone along a path that ends at the North Star? Do they actively prevent us from ever getting there? Prioritizing solutions that get us closer to the North Star can be a powerful momentum building tool.

Humans find it a lot easier to make one more step along a path they are already on, than to make the first step on an entirely new path. This is well-established in psychology and often used as a technique for managing depression or executive dysfunction. However, it applies on anything that involves humans — and that includes product design.

Once we’re partway there, it naturally begs the question: can we get closer? How much closer? Even if we can’t get all the way there, maybe we can close enough that the remaining distance won’t matter. And often, the closer you get, the more achievable the finish line gets.

In fact, sometimes simply reframing the North Star as a sequence of milestones rather than a binary goal can be all that is needed to make it feasible. For an example of this, check out the CSS Nesting case study below.

Case studies

In my 20 years of product design, I have seen ephemeral constraints melt away so many times I have learned to interpret “unimplementable” as “kinda hard; right now”. Two examples from my own experience that I find particularly relevant below, one around Survey UI, and one around a CSS language feature.

Context Chips and the Power of Engineering Momentum

The case study is described at length in Context Chips in Survey Design: “Okay, but how does it feel?”. In a nutshell, the relevant bits are:

• Originally, I needed to aggressively prioritize due to minimal engineering resources, which led me to design an extremely low-effort solution which still satisfied requirements.
• The engineer hated the low-effort idea so much, he prototyped a much higher-effort solution in a day, backend and all. Previously, this would have been entirely out of the question.
• Once I took the ephemeral constraints out of the question, I was able to design a much better, novel solution, but it got pushback on the basis of effort.
• Prototyping it allowed us to user test it, which revealed it performed way better than alternatives.
• Once user testing built engineering momentum and the implementation was more deeply looked into, it turned out it did not actually require as much effort as initially thought.

Here is a dirty little secret about software engineering (and possibly any creative pursuit): neither feasibility nor effort are fixed for a given task. Engineers are not automatons that will implement everything with the same energy and enthusiasm. They may implement product vision they disagree with, but you will be getting very poor ROI out of their time.

Investing the time and energy to get engineers excited can really pay dividends. When good engineers are excited, they become miracle workers.

In fact, engineering momentum is often, all that is needed to make the infeasible, feasible. It may seem hard to fit this into the crunch of OKRs and KPIs but it’s worth it; the difference is not small, it is orders of magnitude. Things that were impossible or insurmountable become feasible, and things that would normally take weeks or months get done in days.

One way to build engineering momentum is to demonstrate the value and utility of what is being built. All too often, product decisions are made in a vacuum, based on gut feelings and assumptions about user needs. Backing them up with data, such as usability testing sessions is an excellent way to demonstrate (and test!) their basis. When possible, having engineers observe user testing sessions firsthand can be much more powerful than secondhand reports.

Relaxed CSS Nesting and the Power of Evolution

Sometimes high effort things just take a lot of hard work and there is no way around it. Other times, feasibility is just one good idea away.

One of my favorite examples, and something I’m proud to have helped drive is the relaxed CSS Nesting syntax, now shipped in every browser. It is such an amazing case study on the importance of having an explicit and consensus-backed North Star UI ^[2].

In a nutshell, CSS nesting was a (then new) CSS syntax that let developers better organize their code through reducing repetition.

table.browser-support {
	border-collapse: collapse;
}
table.browser-support th,
table.browser-support td {
	border: 1px solid silver;
}
@media (width < 600px) {
	table.browser-support,
	table.browser-support tr,
	table.browser-support th,
	table.browser-support td {
		display: block;
	}
}
table.browser-support th {
	border: 0;
}
table.browser-support td {
	background: yellowgreen;
}
table.browser-support td:empty {
	background: red;
}
table.browser-support td > a {
	color: inherit;
}

table.browser-support {
	border-collapse: collapse;

	@media (width < 600px) {
		&, tr, th, td {
			display: block;
		}
	}

	th, td {
		border: 1px solid silver;
	}
	th {
		border: 0;
	}
	td {
		background: yellowgreen;

		&:empty {
			background: red;
		}

		> a {
			color: inherit;
		}
	}
}

This is one of the rare cases where the North Star was well known in advance, since the syntax was already well established in developer tooling (CSS preprocessors). Instead, the big challenge was navigating the practical constraints, since CSS implemented in browsers has different performance characteristics, so a syntax that is feasible for tooling may be out of reach for a browser. In this case, the North Star syntax had been ruled out by browser engineers due to prohibitive parsing performance ^[3], so we had to design a different, more explicit syntax that could be parsed more efficiently.

At this point, it is important to note that CSS Nesting is a feature that is very heavily used once available. Conciseness and readability are paramount, especially when conciseness is the sole purpose of the feature in the first place!

Initial attempts for a syntax that satisfied these technical requirements introduced a lot of noise, making the syntax tedious to write and noisy to read. Even worse, these attempts were actively incompatible with the North Star syntax, as well as other parts of the language (namely, the @scope rule). This meant that even if the North Star syntax became feasible later, CSS would need to forever support syntax that would then have no purpose, and would only exist as a wart from the past, just like HTML doctypes.

Once Google became very keen to ship Nesting (driven by State of CSS 2022, which showed it as the top missing CSS feature), a small subset of the CSS Working Group, led by Elika Etemad and myself met to explore alternatives, and produced four competing proposals. The one that the group voted to adopt ^[4] was the one I designed explicitly to answer the question: If the North Star syntax is out of the question right now, what is the largest subset of it that is feasible?

Once we got consensus on this intermediate syntax, I started exploring whether we could get any closer to the 🌟, even proposing an algorithm that would reduce the number of cases that required the slower parsing to essentially an edge case. A few other WG members joined me, with my co-TAG member Peter Linss being most vocal.

This is a big advantage of North Star compatible designs: it is much easier to convince people to move a little further along on the path they are already on, than to move to a completely different path. With a bit of luck, you may even find yourself implementing an “infeasible” North Star without even realizing it, one little step at a time.

We initially faced a lot of resistance from browser engineers, until eventually a brilliant Google engineer, Anders Ruud and his team experimented with variations of my proposed algorithm and actually closed in on a way to implement the North Star syntax in Chrome. The rest, as they say, is history. 🌟

Conclusion

Hopefully by now you’re convinced about the value of investing time in reaching alignment on an explicit North Star that has buy-in from the entire product team.

A common misconception is that the North Star is a static goal that prevents you from adapting to new data, such as customer feedback. But often, your North Star will change a lot over time, and that’s okay. Having an initial destination does not take away your ability to course correct. That’s not giving up, it’s adapting.

And yes, it’s true that many product teams do use a vision-led approach — they just start from the car, not the hovercar. While that confers some of the benefits above, there is still an implicit reduction happening, because the hovercar is still there in the back of their mind.

Note that for this framework to be beneficial, it is important that everyone is on the same page and understands the steps, benefits, and goals of this approach. Co-designing a North Star with a team that sees the process as a pointless thought experiment will only add friction and will not confer any of these benefits. Also, this is a mindset that can only work when applied top-down. If you are not a decision-maker at your place of work and leadership is not on board, you will have a very hard time if you try to push this ad hoc, without first getting leadership buy-in. You can try sending them a link to this blog post!

If this post resonated, please share your own case studies in the comments. Or, if you decide to give this framework a try, I’d love to hear how it went!

A love letter to the Bluesky API

I’m old enough to remember the golden Web 2.0 era, when many of today’s big social media platforms grew up. A simpler time, when the Web was much more extroverted. It was common for websites to embed data from others (the peak of mashups), and prominently feature widgets from various platforms to showcase a post’s likes or shares.

Especially Twitter was so ubiquitous that the number of Twitter shares was my primary metric for how much people were interested in a blog post I wrote. Then, websites started progressively becoming walled gardens, guarding their data with more fervor than Gollum guarding the Precious. Features disappeared or got locked behind API keys, ridiculous rate limits, expensive paywalls, and other restrictions. Don’t get me wrong, I get it. A lot of it was reactionary, a response to abuse — the usual reason we can’t have nice things. And even when it was to stimulate profit — it is understandable that they want to monetize their platforms. People gotta eat.

I was recently reading this interesting article by Salma Alam-Naylor. The article makes some great points, but it was something else that caught my eye: the widget of Bluesky likes at the bottom.

I mentioned it to my trusty apprentice Dmitry who discovered the API was actually much simpler than what we’ve come to expect. Later, it turned out Salma has even written an entire post on how to implement the same thing on your own site.

The openness of the API was so refreshing. Not only can you read public data without being authenticated, you don’t even need an API key! Major nostalgia vibes.

It seemed the perfect candidate for a web component that you can just drop in to a page, give it a post URL, and it will display the likes for that post. I just had to make it, and of course use it right here.

Web Components that use API data have been historically awkward. Let’s set aside private API keys or APIs that require authentication even for reading public data for a minute. Even for public API keys, where on Earth do you put them?! There is no established pattern for passing global options to components. Attributes need to be specified on every instance, which is very tedious. So every component invents their own pattern: some bite the bullet and use attributes, others use static class fields, data-* attributes on any element or on specific elements, separate ES module exports, etc. None of these are ideal, so components often do multiple. Not to mention the onboarding hassle of creating API keys if you want to try multiple APIs.

The Bluesky API was a breath of fresh air: just straightforward HTTP GET requests with straightforward JSON data responses.

Sing with me!
🎶 all you need is fetch 🎺🎺🎺
🎶 all you need is fetch 🎺🎺🎺
🎶 all you need is fetch, fetch 🎶
🎶 fetch is all you need 🎶

Building a component that used it was a breeze.

Two Components for displaying Bluesky likes

In the end I ended up building two separate components, published under the same bluesky-likes npm package:

• <bluesky-likes> — displays the number of likes for a post, and
• <bluesky-likers> — displays the list of users who liked a post.

They can be used separately, or together. E.g. to get a display similar to Salma’s widget, the markup would look like this:

<script src="https://unpkg.com/bluesky-likes" type="module"></script>

<h2>
	<bluesky-likes src="https://bsky.app/profile/lea.verou.me/post/3lhygzakuic2n"></bluesky-likes>
	likes on Bluesky
</h2>

<p>
	<a href="https://bsky.app/profile/lea.verou.me/post/3lhygzakuic2n">Like this post on Bluesky to see your face on this page</a>
</p>

<bluesky-likers src="https://bsky.app/profile/lea.verou.me/post/3lhygzakuic2n"></bluesky-likers>

And the result would be similar to this:

I started by making a single component that did both, but it quickly became clear that it was better to split them up. It provided a lot more flexibility with only a tiny bit more effort for the common case, and it allowed me to simplify the internal structure of each component.

Requests are aggressively cached across component instances, so the fact that it’s two separate components doesn’t mean you’ll be making duplicate requests. Additionally, these ended up pretty lightweight: the whole package is ~2.5 KB minified & gzipped and dependency-free.

API Design for Web Components

Design Principles

Per my usual API design philosophy, I wanted these components to make common cases easy, complex cases possible, and not have usability cliffs, i.e. the progression from the former to the latter should be smooth.

What does that mean for a web component?

Common use cases should be easy

You should have a good result by simply including the component and specifying the minimum input to communicate your intent, in this case, a Bluesky post URL.

• You should not need to write CSS to make it look decent
• You should not need to write JavaScript to make it work
• You should not need to slot content for things that could have sensible defaults
• You should not need to specify things it can figure out on its own from things you’ve already specified

Complex use cases should be possible

If you’re willing to put more work into it, the sky should be the limit. You should be able to completely restyle it, customize nearly every part of its UI etc, but the UX of these things doesn’t need to be optimized.

For example:

• Extensibility over encapsulation: If something doesn’t need to be hidden away, expose it as a part. Don’t be frugal with your parts. The downsides of exposing too many parts are few and small, but not exposing enough parts can make certain styling impossible.
• Don’t be frugal with slots: use slots with fallback content liberally. That way people can customize content or even entire parts of the UI.
• Expose states for conditional styling. Yes, it’s Baseline now.

For these components, as a proof of concept, in addition to parts and slots all component styles and templates are exposed as static properties on the component class that you can modify or replace, either directly on it, or in your own subclass, for extreme customizability.

No usability cliffs

Making common things easy and complex things possible is not enough for a good API. Most use cases fall somewhere in between the two extremes. If a small increase in use case complexity throws users off the deep end in terms of API complexity, they’re gonna have a bad time.

The API should have enough customization hooks that common customizations do not require going through the same flow as full customization and recreating everything.

For web components, this might mean:

• Ideally, standard CSS properties on the host should work. This is also part of the principle of least astonishment. However, sometimes this is simply not feasible or it would require unacceptable tradeoffs, which brings us to…
• Exposing enough custom properties that basic, common customizations don’t require parts.
• Nest slots liberally: You should not have to replace an entire part of the UI just to customize its content. Nested slots allow you to provide UI extension points at different levels of abstraction.

The 99-99 rule of Web Components

The Ninety-Ninety Rule tells us that the last 10% of the work takes 90% of the time. I would argue that for web components, it’s more like a 99-99 Rule.

Take these components as an example. They are the poster child for the kind of straightforward, simple component that does one thing well, right? But web components are a bit like children: if most people realized upfront how much work they are, way fewer would get made. 😅

Even when the core functionality is straightforward, there are so many other things that need to be done:

• Dynamically responding to changes (in attributes, slots, nested content, etc) like regular HTML elements takes work, especially if you want to do it 100% properly, which is rarely a good idea (more on that below). Libraries like Lit make some of it easier, but not trivial.
• Accessibility and i18n often take orders of magnitude more work than core functionality, especially together.
• Designing & implementing style and UI customization hooks
• Figuring out the right tradeoffs between performance and all of the above

And this is without any additional functionality creeping up.

Some battle scars examples below.

Customizing the link in <bluesky-likes>

A good component has sensible defaults, but allows customization of everything users may reasonably want to customize. There is nothing more annoying than finding a web component that does almost what you want, but doesn’t allow you to customize the one thing you really need to customize.

My first prototype of <bluesky-likes> always had an internal link in its shadow DOM that opened the full list of likers in a new tab. This opened it up to usability, accessibility, and i18n issues:

• What if you want it to link to the post itself, or even an entirely different URL?
• How to customize the link attributes, e.g. rel or target?
• a11y: The link did not have a title at the time, only the icon had alt text. This meant assistive technologies would read it like “Butterfly blue heart fifteen”. How to word the link title to best communicate what the link does to assistive technologies without excessive verbosity?
• And then, how to allow users to customize the link title for i18n?

Often components will solve these types of problems the brute force way, by replicating all <a> attributes on the component itself, which is both heavyweight and a maintenance nightmare over time.

Instead, we went with a somewhat unconventional solution: the component detects whether it’s inside a link, and removes its internal <a> element in that case. This solves all four issues at once; the answer to all of them is to just wrap it with the link of your choice. This allowed us to just pick a good default title attribute, and not have to worry about it.

It’s not perfect: now that :host-context() is removed, there is no way for a component to style itself differently when it’s inside a link, to e.g. control the focus outline. And the detection is not perfect, because doing it 100% perfectly would incur a performance penalty for little gain. But on balance, it so far seems the tradeoffs are worth it.

The pain of creating accessible components

My first prototype of <bluesky-likers> wrapped all avatars with regular links (they just had rel="nofollow" and target=_blank"). Quite reasonable, right? And then it dawned on me: this meant that if a keyboard user had the misfortune of stumbling across this component in their path, they would have needed to hit Tab 101 (!) times in the worst case to escape it. Yikes on bikes! 😱

So what to do? tabindex="-1" would remove the links from the tabbing order, fixing the immediate problem. But then how would keyboard users actually access them?

A bigger question is “Do they need to?”. These links are entirely auxiliary; in Salma’s original widget avatars were not links at all. Even if someone wants to explore the profiles of people who liked a post for some reason, the Bluesky “Liked By” page (already linked via <bluesky-likes>) is a much better fit for this.

When using a pointing device, links are free. If you don’t interact with them, they don’t get in your way, so you may as well have them even if few users will need them. But when something is part of the tabbing order, there is now a cost to it. Is the value of being able to tab to it outweighed by the friction of having to tab past it?

On the other hand, it feels wrong to have links that are not exposed at all to keyboard and assistive tech users. Even if they are auxiliary, making them entirely inaccessible feels like we’re talking away their agency.

I decided to err on the side of exposing the links to keyboard users, and added a description, via a description slot with default fallback content, to explain to SR users what is being displayed, and a skip link after it, which is visible when focused.

<bluesky-likers src="...">
     <div slot="empty">No likers :(</div>
</bluesky-likers>

It’s still not an ideal user experience though. A skip link offers you the choice of skipping only at the beginning. What happens if you tab through 30 links, and then decide you’ve had too much? Or when you’re tabbing backwards, via Shift+Tab? Then you’re still stuck wading through all links with no escape and no respite.

In the end, perhaps I should bite the bullet and implement more sophisticated keyboard navigation, similar to how native form controls work (imagine a <select> having tab stops for every <option>!). But I have already spent more than is reasonable on these components, so it’s time to let them ride the trains, and leave the rest to PRs. For now, I implemented Home and End keys to jump to the first and last link respectively, so that at least users have an out.

But as a former TAG member, I can’t help but see this as a gap in the platform. It should not be this hard to create accessible components. It should not require jumping through hoops, and the process should not be a minefield. Good keyboard accessibility benefits everyone, and the primitives the web platform currently provides to enable that are egregiously insufficient.

The pain of creating localizable web components

Difficulty jumps to eleven when you want to make a component localizable. As a minimum, it means any UI text, no matter where it appears, must be customizable. This is desirable anyway for customizability, but it becomes essential for localization. The quick and dirty way is to provide slots for element content and attributes for content that appears in attributes (e.g. titles, aria-labels, etc).

However, this is often not enough. For example, both components display formatted numbers: <bluesky-likes> displays the total number of likes, and <bluesky-likers> displays the number of likes not shown (if any).

The web platform thankfully already provides a low-level primitive for formatting numbers: Intl.NumberFormat, which you can also access via number.toLocaleString(). For example, to format 1234567 as 1.2M , you can do

// Try it in the console!
(1234567).toLocaleString("en", {notation: "compact"})

This is great for English UIs, but what about other languages?

If you answered “Oh, we’ll just pass this.lang to instead of a hardcoded "en"”, you’d be wrong, at least for the general case. That gives you the element language only when it’s directly specified on the element via a lang attribute. However, usually the lang attribute is not specified on every element, but on an ancestor, and it inherits down.

Something like is a good compromise:

const lang = this.lang
			|| this.parentNode.closest("[lang]")?.lang
			|| this.ownerDocument.documentElement.lang
			|| "en";

This gets you the element’s language correctly if it’s:

• specified on the element itself
• specified on an ancestor element within the same shadow tree
• specified on the root element of the document

This is what these components use. It’s not perfect, but it covers a good majority of cases with minimal performance impact. Notably, the cases it misses is when the component is inside a shadow tree but is getting its language from an element outside that shadow tree, that is also not the root element. I’d wager that case is very rare, and there is always the escape hatch of specifying the lang attribute on the component itself.

What would doing it 100% properly entail?

If the route above is a shortcut and misses some cases, you may be wondering what it would take to cover every possible case. Maybe it’s just for the lulz, or maybe you’re working under very strict guidelines that require you to fully emulate how a native element would behave.

So what would doing it 100% properly look like? First, we’d want to take nested shadow roots into account, using something like this, which you might want to abstract into a helper function.

let lang = this.lang;
if (!lang) {
	let langElement = this;
	while (!(langElement = langElement.closest("[lang]"))) {
		let root = langElement.getRootNode();
		let host = root.host ?? root.documentElement;
		langElement = host;
	}

	lang = langElement?.lang || "en";
}

But, actually, if you really needed to do it properly, even now you wouldn’t be done! What about dynamically reacting to changes? Any element’s lang attribute could change at any point.

Er, take my advice and don’t go there. Pour yourself a glass of wine (replace with your vice of choice if wine is not your thing), watch an episode of your favorite TV show and try to forget about this.

Some of you will foolishly continue. I hear some voices at the back crying “But what about mutation observers?”.

Oh my sweet summer child. What are you going to observe?

The element with the lang attribute you just found? WRONG. What if a lang attribute is added to an element between that ancestor and your component? I.e. you go from this:

<div lang="el" id="a">
	<div id="b">
		<bluesky-likes src="..."></bluesky-likes>
	</div>
</div>

To this:

<div lang="el" id="a">
	<div lang="es" id="b">
		<bluesky-likes src="..."></bluesky-likes>
	</div>
</div>

Your component language is now es, but nothing changed in the element you were observing (#a), so nothing notified your component. What is your recourse?

I told you to not think about it. You didn’t listen. It’s still not too late to skip this section and escape the horrors that lie ahead.

Still here? Damn, you’re stubborn. Fine, here’s how to do it with mutation observers if you really need to. But be warned, it’s going to hurt.

Mutation observers cannot observe ancestors, so the only way to detect changes that way would be to observe not just the element with the lang attribute but also its entire subtree. Oh and if the path from your component to that ancestor involves shadow trees, you need to observe them separately, because mutation observers don’t reach past shadow trees (proposal to change that).

😮‍💨 Surely, that should do it, right? WRONG again. I told you it would hurt.

Consider the scenario where the ancestor with the lang attribute is removed. Mutation observers cannot observe element removal (proposal to fix that), so if you go from this:

<body lang="el">
	<div lang="el" id="a">
		<div id="b">
			<bluesky-likes src="..."></bluesky-likes>
		</div>
	</div>
</div>

To this:

<body lang="el">
	<div id="b">
		<bluesky-likes src="..."></bluesky-likes>
	</div>
</div>

…nothing will notify your component if you’re just observing #a and its descendants.

So the only way to get it right in all cases is to observe the entire tree, from the document root down to your component, including all shadow trees between your component and the root. Feeling nauseous yet?

There is one alternative. So, the browser knows what the element’s language is, but the only way it exposes it is the :lang() pseudo-class, which doesn’t allow you to read it, but only check whether an element matches a given language. While not ideal, we can hack this to observe language changes.

Coupled with the earlier snippet to detect the current language, this allows us to detect changes to the component’s language without the huge performance impact of observing the entire page.

How can we do that? Once you’ve detected the component language, generate a rule that sets a CSS variable. E.g. suppose you detected el, you’d add this to your shadow DOM:

:host(:lang(el)) {
	--lang: el;
}

Then, we register the --lang property, and observe changes to it via Style Observer or just raw transition events. When a change is detected, run the detection snippet again and add another CSS rule.

Now, should you do this? Just because you can, doesn’t mean you should. In the vast majority of cases, a few false positives/negatives are acceptable, and the tradeoff and performance impact of introducing all this complexity is absolutely not worth it. I can only see it being a good idea in very specific cases, when you have a reason to strive for this kind of perfection.

Most of web components development is about making exactly these kinds of tradeoffs between how close you want to get to the way a native element would behave, and how much complexity and performance impact you’re willing to sacrifice for it. But going all the way is rarely a good balance of tradeoffs. That said, this should be easier. Reading a component’s language should not require balancing tradeoffs for crying out loud!

There is some progress on that front. In September at TPAC we got WHATWG consensus on standardizing a way to read the current language / direction and react to future changes. To my knowledge, not much has happened since, but it’s a start. Perhaps this dramatic reenactment generates some empathy among WHATWG folks on what web components developers have to go through.

🚢 it, squirrel!

It’s all fun and games and then you ship.

Hopefully, I have demonstrated that if you’re not careful, building a web component can become a potentially unbounded task. Some tasks are definitely necessary, e.g. accessibility, i18n, performance, etc, but there comes a point where you’re petting.

So here they are: Demo Repo NPM

They’re far from perfect. Yes, they could be improved in a number of ways. But they’re good enough to use here, and that will do for now. If you want to improve them, pull requests are welcome (check with me for big features though). And if you use them on a for-profit site, I do expect you to fund their development. That’s an ethical and social expectation, not a legal one (but it will help prioritization, and that’s in your best interest too).

If you’ve used them, I’d love to see what you do with them!

Thanks to Léonie Watson for some of the early a11y feedback, and to Dmitry Sharabin for helping with the initial API exploration.

I recently stumbled across The Oatmeal’s series on Creativity. While all of it is spot on, the part on erasers hit especially hard.

“There is a lot of shame associated with backpedaling; things like quitting your job, getting a divorce, or simply starting over are considered shameful.

But forward isn’t always progress.

And backward isn’t always regress.

Sometimes going down the wrong path isn’t a mistake — it’s a construction line.”

— Matthew Inman (The Oatmeal)

It was exactly what I needed to hear. You see, only a few days prior, Font Awesome and I had parted ways — the end of a short, but transformative chapter. I’m proud of what we built together, and grateful for what I learned along the way. But it was time to move on.

Jobs are a lot like relationships. They often start with infatuation — and end with the realization that you’re simply not compatible, and that’s no-one’s fault. Letting go always stings, even when it’s the right call. There’s always grief: when you’re not ready to move on, you grieve the bond; when you are, you grieve your expectations. But every ending leaves behind clarity — about who you are, and what makes you happy.

The pursuit of happiness

Today is my 39th birthday — and this summer marks 20 years since I first dipped my toes into this industry. Naturally, I’ve been doing a lot of reflection.

As is typical for ADHDers, I have done a ton of different things, and built a diverse skillset as a result. But what made me happiest? The list of highs went a bit like this:

• Entrepreneurship: Co-founding a startup and driving it to become a household name (in Greece — this was 2008!)
• Consulting: Being a full-time consultant, speaker, and author, traveling the world and jumping from one exciting gig to another
• Academia:^[1] Pushing the boundaries of Human-Computer Interaction at MIT and teaching MIT CS students to care about people.

All had three things in common: autonomy, breadth, and impact.

These three things have been the biggest predictors of happiness for me — far more than income ^[2] or work-life balance, which are the usual suspects.

I used to aspire to work-life balance in the same way I aspired to frequent exercise — because it was good for me, not because it gave me joy. Eventually I realized that what makes me happy isn’t working less, it’s loving what I do, and feeling it matters. Working less cannot transform how your work makes you feel; it can only dampen the effects. But dilution doesn’t turn misery into joy — at best it just makes it tolerable. Don’t get me wrong, poor WLB can absolutely make you miserable; when long hours are an externally imposed expectation, not an internal drive fueled by passion. As with many things in life, it’s enthusiastic consent that makes all the difference.

Then there’s breadth. Most jobs try to box you in: PM or engineer? Scientist or practitioner? UX Researcher or designer? DevRel or standards? And I’m like…

It’s silly that people are forced to choose, and present themselves as less than to seem more attractive to hiring managers. To use myself as an example:

• Web architecture: I have designed several web technologies that have shipped across all browsers. I’ve spent 4 years in the TAG, reviewing new web technologies across the web platform, and eventually leading the Web Platform Design Principles effort.
• Product/usability/HCI: Prior to working as Product Lead at Font Awesome, I’ve earned a PhD at MIT in Human-Computer Interaction with a minor in Entrepreneurship & Innovation. I published peer reviewed papers in top-tier HCI conferences, and co-created/taught a course on usability & web technologies that is now a permanent subject. I have run user research for scientific and industry projects. I have started several open source projects, some used by millions. In the more distant past, I co-founded a (then) well-known social startup in my home country, Greece and ran product, engineering, and design for three years (six if you count pre-incorporation).
• DevRel: I’ve given over 100 conference talks, published a bestselling book on CSS, and was the first devrel hire at W3C back in 2012. I have built dozens of apps and polyfills that stimulated developer interest in new Web features and drove browser adoption.

Should I present myself as a web architecture expert, a usability/product person, an HCI researcher, or a Developer Advocate?

What a pointless dilemma if I ever saw one!

Combining skills across different areas is a strength to be celebrated, not a weakness to be swept under the rug. The crossover between skills is where the magic happens. Off the top of my head:

• Understanding usability principles has made me a far better web standards designer.
• Web standards work is product design on hard mode. After the impossibly hard constraints and tradeoffs you deal with when designing APIs for the Web platform, regular product problems seem like a cakewalk (we have versions? And we can actually change things?? And we have reliable metrics?!? And the stakeholders all work at the same company?!? 🤯).
• They often feed into each other: DevRel work made me a better communicator in everything I do. Usability made me a better speaker and educator^[3], so a better developer advocate too.
• Leading the Web Platform Design Principles convinced me that explicit design principles are immensely useful for all product work.
• Web standards taught me that contrary to popular belief, you do not need a benevolent dictator to ship. But then you do need a good process. Consensus does not magically grow on trees, building consensus is its own art.

Lastly, impact does not have to be about solving world hunger or curing cancer. Making people’s lives a little better is meaningful impact too. It all boils down to:

You can achieve the same total impact by improving the lives of a few people a lot, or the lives of many people a little. For example, my work on web standards has been some of the most fulfilling work I’ve ever done. Its Individual Impact is small, but the Reach is millions, since all front-end developers out there use the same web platform.

What’s next?

Since consulting and entrepreneurship have been my happiness peaks, I figured I’d try them again. Yes, both at once, because after all, we’ve already established that WLB is a foreign concept 🤣

My apprentice Dmitry and I have been in high gear building some exciting things, which I hope to be able to share soon, and I feel more exhilarated than I have in years. I had missed drawing my own lines.

In parallel, I’m taking on select consulting work, so if you need help with certain challenges, or to level up your team around web architecture, CSS, or usability, get in touch.

Don’t get me wrong, I’m not closing the door to full-time roles. I know there are roles out there that value passion and offer the kind of autonomy, breadth, and impact that would let me thrive. It’s the ROI of digging through rubble to find them that gives me pause — as a product person at heart, I/E tradeoffs are top of mind. But if you have such a unicorn, I’m all ears.

I also finally took a few small steps to make my pro bono work financially sustainable, a long overdue todo item. Both pages still need work, but you can now support my writing via ko-fi^[4], and my open source work via GitHub Sponsors. I made separate pages for my two most popular projects, Prism (nearing 1.8 billion total npm installs! 🤯) and Color.js. This is as much about prioritization as it is about sustainability: money is an excellent signal about what truly matters to people.

I don’t have a polished “next” to announce yet.
But I’m exactly where I need to be.

Sometimes the clearest lines are the ones drawn after you erase.